By
Elias Brandt
Elias Brandt writes about marketing, email and analytics tools for Appcyclopedia, working on a ThinkPad X1 Carbon Gen 10 and a Galaxy S25.
- Windows
Short answer
Outlook shows two kinds of codes. 0x8… codes (0x800CCC0E, 0x800CCC0F, 0x8004010F) come from the Outlook app on your computer and mean it could not connect, sync or read your profile. Three-part codes such as 550 5.1.10 come back in a bounce message and mean the receiving mail server refused the email.
The catch: a code that starts with 4 is temporary and Outlook keeps retrying, while 5 means the message failed for good. Change something before you resend a 5.x.x bounce.
Below: the app codes, the bounce codes, and how to read the first digit of a bounce.
How to fix an Outlook send or receive error
To fix an Outlook error code on Windows, rule out the connection and the password first, then the add-ins, then the profile. Bounce codes need a different fix, covered in the tables below.
-
Check the connection and the server status
Open a web page to confirm you are online. If the account is Gmail or Yahoo, sign in to it on the web: if that fails too, the problem is the account, not Outlook.
-
Update the saved password or app password
A changed or expired password is the most common cause of 0x800CCC0F and 0x800CCC0E on IMAP accounts. Create a new app password with the email provider, then in Outlook go to File, Account Settings, select the account and paste it under Server Settings.
-
Clear the stored sign-in for Gmail or Yahoo
Close Outlook and open Credential Manager, Windows Credentials. Under Generic credentials, remove the entries that start with
MicrosoftOffice16_Data:OAUTH2for that account, then restart Outlook and sign in again. -
Start Outlook in safe mode
Press Windows+R, type
outlook.exe /safeand press Enter. If the error stops, an add-in is causing it: turn add-ins off one at a time under File, Options, Add-ins. -
Create a new Outlook profile
0x8004010F often means the profile is damaged. In Control Panel, Mail, Show Profiles, add a new profile, set up the account in it and choose Always use this profile.
A common case: after a Gmail password change, Outlook shows "Check for new mail reported error (0x800CCC0E)" and never asks to sign in. Step 1 shows Gmail works on the web, and step 3 removes the old sign-in so Outlook asks for the new password.
Most 0x8… errors are about sign-in or connection, which is why the profile comes last.

More about Outlook
Microsoft’s email and calendar app, for personal and work accounts.
Outlook error not going away?
- 0x800CCC0F only on Windows 10
TLS 1.3 settings can conflict with Outlook on Windows 10. This needs a registry change under SCHANNEL, so ask whoever manages the computer, or update to Windows 11.
- Bounce with 5.1.8 or 5.7.501 for every message you send
The account was blocked for sending spam, often because it was hacked. Change the password, check for forwarding rules you did not create, and contact the email administrator.
- Errors in a .pst or .ost data file
Run the Inbox Repair Tool (scanpst.exe) on the data file, then reopen Outlook.
Outlook app error codes
| Code | What it means | What to do |
|---|---|---|
| 0x800CCC0E | Outlook could not connect to the server while checking for mail | Check the password, then clear the stored sign-in |
| 0x800CCC0F | The connection to the server was interrupted | Create a new app password; on Windows 10, check TLS 1.3 |
| 0x80070057 | Sending failed, seen with Gmail and Yahoo sign-in problems | Clear the stored sign-in and sign in again |
| 0x8004010F | Outlook cannot find or read part of the profile or data file | Create a new profile |
| 0x80004005 | A general failure, often with AutoDiscover on work accounts | Restart Outlook; if it repeats, ask your IT admin |
Bounce codes when an email comes back
These arrive in a message from the mail system, usually titled “Undeliverable”. The code sits near the bottom of the message.
| Code | What it means | What to do |
|---|---|---|
| 4.4.7 | The message expired before it could be delivered | Wait; if it bounces for good, try again later |
| 5.1.1 | Bad destination address: wrong, deleted or moved mailbox | Check the address and clear the old autocomplete entry |
| 5.1.8 | Your account was blocked for sending spam | Secure the account and contact the administrator |
| 5.1.10 | Recipient not found | Check the spelling; ignore it if you never sent the email |
| 5.1.90 | You reached the daily limit for recipients | Wait 24 hours |
| 5.2.2 | Submission quota exceeded: too many messages or recipients | Wait, and check the account was not hacked |
| 5.4.1 | The receiving server does not accept mail for that address | Check the address; the recipient’s admin may need to fix it |
| 5.4.14 | A routing loop between mail servers | The recipient’s admin needs to fix the setup |
| 5.7.1 | Delivery not authorized, often a restricted group | Ask the group owner to allow you |
| 5.7.124 | You are not on the group’s allowed-senders list | Ask the group owner to add you |
| 5.7.133 | The group rejects mail from outside its organization | Contact a member another way |
| 5.7.509 | Your domain failed DMARC and its policy says reject | The sender’s domain needs SPF, DKIM and DMARC fixed |
| 5.7.520 | Your organization does not allow automatic external forwarding | Turn off the forwarding rule or ask the admin |
| 5.7.703 | Your organization blocks that address or domain | Ask your admin |
A 5.1.x code is almost always the address, and a 5.7.x code is almost always a rule or permission somewhere along the way.
How to read the first digit
The first part of a bounce code is the class. 4 means a temporary problem and the server keeps trying. 5 means a permanent failure and nothing happens until something changes: the address, a setting, or a rule on the other side.
Two questions before you resend
Is the code in the app or in a bounce? App codes are fixed on your computer. Bounce codes are about the message, and resending without a change gets the same bounce back.
Outlook error codes: questions
- What does 0x800CCC0E mean in Outlook?
- Outlook could not connect to the mail server while checking for new mail. With Gmail and Yahoo it usually means the stored sign-in is no longer valid.
- What does 550 5.1.10 mean?
- The address you sent to does not exist or could not be found. Check the spelling. If you never sent that email, it is a bounce from spam that forged your address and can be deleted.
- Should I resend after a 4.x.x code?
- No. A 4.x.x code is temporary and the server keeps retrying on its own. You only get a final bounce if it still fails.
Share this guide
Link copied
Was this guide helpful?
What was missing?
Thanks, that helps us.
Updated